Question about Input Method

The keyboard function setting of the USB foot switch needs to turn off the input method or switch the input method to the English input method. The FootSwitch software can only display the letters, numbers and characters in the keyboard as shown below.

As shown in the figure below, the three button settings are as follows:

When the computer is in English input state, press three keys in turn to output "[]", and if the input method is Japanese input method, press three keys in turn to output "@[]", the layout of the Japanese keyboard is as follows:

The Japanese keyboard and English keyboard are mostly the same. To set the corresponding function, first turn off the input method or switch to the English input method, then press the corresponding button on the keyboard, and click Save.

It is necessary to pay attention to the software. The above shows the functions under the English input method. For example, some special function keys need to be checked and set on the software.

For example, "no conversion" needs to be checked and set on the software, as shown in the following figure:

The other language input method function setting methods are similar and will not be described again.